Quality Discussion

Discussion List

• One minute from Dr. Deming on management focus

  Announcement 430 views 1 comment 6 points Most recent by Anne S July 2019
• Dr. Deming discusses the dreaded annual performance appraisal

  Announcement 224 views 2 comments 2 points Most recent by Anne S April 2019
• Why is there not a place on the external calibration screen for the "measurement of uncertainty?

  Accepted Answer 92 views 1 comment 1 point Most recent by Cal_vin February 6
• 2020 is the year that I...

  23 views 0 comments 2 points Started by Derek B January 14
• Feedback

  65 views 0 comments 1 point Started by Anne S November 2019
• Dr. Deming’s Influence on Me – Point #2

  135 views 2 comments 4 points Most recent by heddjack July 2019
• Dr. Deming's Influence on Me - Point #3

  79 views 3 comments 4 points Most recent by Beth S July 2019
• Making Quality Cool Again

  129 views 1 comment 6 points Most recent by Matt L June 2019
• Role Call!

  177 views 7 comments 6 points Most recent by KATYDID May 2019
• Quality & Data Security

  59 views 2 comments 3 points Most recent by Matt L March 2019
• Dr. Deming's Influence on Me - Point #1

  118 views 1 comment 6 points Most recent by Anne S February 2019
• Out of Control - what do I do?

  111 views 1 comment 2 points Most recent by heddjack January 2019
• The role of data and charts in recurring meetings

  46 views 0 comments 4 points Started by Derek B December 2018
• Gage R&R - how to conduct?

  145 views 2 comments 3 points Most recent by Stephen Puryear November 2018
• Good GR&R Bad NDC

  114 views 5 comments 2 points Most recent by Miro November 2018
• What is the best practice when you have zero defects?

  127 views 6 comments 6 points Most recent by Tony Casciano October 2018
• NIST numbers

  214 views 5 comments 6 points Most recent by Eric G September 2018
• No-normal Distribution Analysis

  21 views 0 comments 1 point Started by albertojs_21 August 2018
• Gage vs Gauge - which is right?

  Poll 205 views 3 comments 1 point Most recent by TBHill August 2018
• When to do a MSA (GR&R and other techniques)

  45 views 0 comments 1 point Started by albertojs_21 August 2018
• What ONE image would you choose for your presentation?

  Poll 114 views 2 comments 4 points Most recent by Matt L August 2018
• Professional Organizations

  44 views 1 comment 4 points Most recent by Eric G August 2018
• Suggestions - National Trend Interpretation Standard (s)?

  82 views 2 comments 5 points Most recent by Tim August 2018
• Alerting Charts

  45 views 3 comments 1 point Most recent by Derek B July 2018
• Audits - How best to prepare?

  396 views 15 comments 4 points Most recent by papakrn July 2018
• Spec Lines on a control chart?

  277 views 10 comments 13 points Most recent by Tim June 2018
• SBC - A Shift in Thinking

  13 views 0 comments 5 points Started by Derek B June 2018
• Run chart vs. control chart?

  Accepted Answer 193 views 5 comments 1 point Most recent by Mfmatusky May 2018
• Understanding variation is fundamental to process management

  64 views 2 comments 3 points Most recent by Mfmatusky May 2018
• What do you think of PQ's new brand identity?

  295 views 3 comments 2 points Most recent by ANDREW April 2018